Professional technicians fabricate and custom-fit metal ductwork, coolant supply lines, and gas supply pipes. This ensures that your new system operates to the manufacturers’ specifications and provides years of trouble-free comfort.
If you want a smart thermostat or other upgrades with your new AC, ask the installers about them in advance. This helps reduce confusion and delays during installation. Contact TAP Heating And Cooling for professional assistance.
The cost of your air conditioning installation will vary depending on the type of equipment used and any necessary modifications to existing infrastructure. For example, if your house doesn’t have a duct system, you may need to install air ducts or repair existing ones. If you’re installing a new AC, the professional will evaluate your home’s square footage to ensure that your system is properly sized. They will also factor in your home’s energy efficiency, insulation and sunlight exposure.
Ductless mini-splits are another option for cooling homes. These systems consist of an outdoor condenser unit and a blower mounted on the inside of your wall. An electrical line connects the indoor and outdoor units, while a refrigerant and drain lines provide a way for condensation to be vented outside. These units are more expensive than window or portable air conditioners, but they offer better performance and can be installed in a variety of rooms.
A new air conditioning system will come with a thermostat, but if you want to keep your old one, the installer will make sure that it is compatible with your new system. You can choose to have a programmable thermostat installed as well, which will allow you to set higher temperatures while you’re at work or away and return the house to a comfortable temperature before you get home.
Before the air conditioning installation starts, the contractor will remove your old AC unit and clean the area around it. They will also test the unit to make sure that it’s working correctly. They will mark where the evaporator coil and condensate pan are located, so that you can replace them later if needed.
Once the new air conditioning is in place, the technician will hook it up to the existing system and link it to your home’s gas line. They will also connect the new air conditioning to the electrical panel and mount a service disconnect box, if needed. The new air conditioner will be connected to a copper pipe or insulated flexible line that runs from the service valve on the outdoor unit to the indoor air handler.
Energy Efficiency
If you’re considering an air conditioning system upgrade, your energy costs will likely be reduced. A new system with a higher SEER rating uses less energy, so it saves you money over time. This system will also help reduce your carbon footprint. Air conditioners with a high SEER rating can help preserve natural resources. Choosing an AC system with a higher rating is a great way to contribute to the environment, so you can feel good about your purchase.
You may notice the benefits of your new system in the form of lower utility bills or a quieter unit, but your impact extends well beyond that. Your new air conditioning system will have a lower energy consumption than the older system, reducing your personal use of coal-burning electricity and preserving natural resources.
Air conditioning systems with a SEER rating above 16 can meet ENERGY STAR specifications, which are the minimum requirements for residential cooling systems. ENERGY STAR-qualified systems are designed to reduce energy use and greenhouse gas emissions by at least 33%. You can find ENERGY STAR-qualified models in both traditional split and packaged systems, as well as in ductless systems.
Proper sizing and installation of your air conditioning system is critical to ensure efficiency. Installing a system that’s too small for your home can reduce its performance by 30%, increasing energy costs and shortening its lifespan. An experienced HVAC contractor can perform load calculations, taking into account your home’s size, layout, and thermal envelope, to ensure the right-sized system is selected for your needs.
When selecting a location for your air conditioner, choose one that’s away from power or connecting lines used by televisions, radios, intercoms, and other appliances. Installing the unit too close to these objects will result in noise and interference, as well as energy loss.
Regular maintenance is also important for ensuring that your air conditioning system continues to operate at maximum efficiency. This includes regularly cleaning or replacing the filter. In fact, a dirty air filter can decrease your air conditioner’s efficiency by up to 15%. So, swapping out the old filter for a new one is one of the easiest and most cost-effective ways to keep your home cool and comfortable.
Noise Levels
A noisy air conditioning system can be a real nuisance and disrupt your home life. Air conditioning manufacturers have a range of options to help reduce noise levels, including quiet modes that operate at lower sound levels. These quiet modes can also help save on energy consumption and costs.
When considering your new air conditioning installation, it is important to take into consideration the noise level regulations set by your local authority. These regulations are in place to ensure that noise emissions from the air conditioner do not unreasonably interfere with the health, welfare, convenience, comfort or amenity of any person.
In general, the maximum permitted interior noise from an air conditioning system is 35 dB. This is an acceptable level of noise that should not disturb neighbours. However, it is important to note that the noise is measured at the property receiving the air conditioning noise, not at the unit itself. As such, the assigned levels need to be adjusted to allow for tonality.
The acoustic design of the air conditioner can have a big impact on its noise levels, as can the type and quality of the installation. Ensure that your installer has experience with the brand and type of air conditioning you are purchasing, as well as understanding the acoustic requirements for the installation location. A poor installation can lead to rattling, vibrations and elevated noise levels throughout the audible frequency spectrum.
To measure the noise level of your air conditioner, you can use a sound meter or download a free app. Be aware that ambient noise can affect the decibel reading, so you should not compare your results with those in your air conditioner manual. It is also important to remember that the higher the cooling capacity of your air conditioning, the greater the noise levels will be.
If you are concerned about your air conditioning noise levels, speak with your local Trane dealer for further information and guidance. Trane air conditioners and heat pumps are engineered with noise reduction in mind and feature impressively low operating sounds.
Maintenance
There are many things that can affect the performance of an air conditioner. For instance, it is important to choose the right unit for your home and ensure that it is properly sized. This will help to avoid excess energy usage and premature wear and tear on the system. In addition, you should regularly check that your HVAC system is functioning correctly and make necessary adjustments. However, these tasks require specialized knowledge and equipment, so you should always contact a professional.
During the AC installation process, the crew will drain the refrigerant from your old system into a recovery tank and install a disconnect box. They will also connect the suction and liquid lines (made of soft copper). These lines are usually installed close to beams or ductwork, and they should be run in paths with as few bends as possible. They will be secured every 4 to 6 feet, and they will be brazed or welded to each other for proper sealing. The installers will also vacuum and add refrigerant to the system.
After the AC installation is complete, the team will remove all materials and tools from your property. They will then roll up the floor protection and load up any equipment or old parts for disposal. They will also test your new AC system and provide you with a walkthrough of the commissioning process. They will answer any questions you may have about the new system and suggest routine maintenance tips.
A newer, more efficient air conditioning system protects your home from the elements and increases its value. It also saves you money on energy bills and reduces the need for costly repairs. A quality AC system should last for a decade or more. However, it will begin to lose efficiency over time. If you notice that your energy bills are rising or that the system is making a lot of noise, it’s time to replace it.
An experienced installation team will take great care in preparing your air conditioning system for optimal performance. They will inspect the unit for signs of leakage and ensure that all electrical connections are tight. They will also check that the refrigerant line connections are clog-free and properly sealed.